Home > Basic Questions

Basic Questions

November 24th, 2018 Go to comments

Question 1

Explanation

Star topology is the most popular topology for the network which allows all traffic to flow through a central device.

star_topology.jpg

Question 2

Explanation

Carrier sense multiple access with collision detection (CSMA/CD) is a media access control method used most notably in early Ethernet (IEEE 802.3) technology for local area networking. When collision detection (CD) observes a collision (excess current above what it is generating, i.e. > 24 mA for coaxial Ethernet), it stops transmission immediately and instead transmits a 32-bit jam sequence.

Note: CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) is a protocol for carrier transmission used in wireless networks. Unlike CSMA/CD (Carrier Sense Multiple Access/Collision Detect) which deals with transmissions after a collision has occurred, CSMA/CA acts to prevent collisions before they happen.

Question 3

Explanation

Each port of a router is a broadcast domain. This router has 2 ports so it has 2 broadcast domains.

Question 4

Question 5

Explanation

Ethernet frame size refers to the whole Ethernet frame, including the header and the trailer while MTU size refers only to Ethernet payload. Baby giant frames refer to Ethernet frame size up to 1600 bytes, and jumbo frame refers to Ethernet frame size up to 9216 bytes (according to this link: http://www.cisco.com/c/en/us/support/docs/switches/catalyst-4000-series-switches/29805-175.html)

For example, standard Ethernet frame MTU is 1500 bytes. This does not include the Ethernet header and Cyclic Redundancy Check (CRC) trailer, which is 18 bytes in length, to make the total Ethernet frame size of 1518.

So according to strict definition, MTU size of 1600 cannot be classified as baby giant frames as the whole Ethernet frames will surely larger than 1600 -> Answer C is not correct.

Answer D is a better choice as the MTU is 1518, so the whole Ethernet frame would be 1536 (1518 + 18 Ethernet header and CRC trailer). This satisfies the requirement of baby giant frames “Baby giant frames refer to Ethernet frame size up to 1600 bytes”.

Question 6

Explanation

To understand more about TCP please read our TCP and UDP tutorial.

Note: Answer F is not correct because TCP does not require applications to determine the retranmission. TCP itself will determine if the data packets should be retransmitted or not.

Question 7

Explanation

Only router can break up broadcast domains so in the exhibit there are 2 broadcast domains: from e0 interface to the left is a broadcast domain and from e1 interface to the right is another broadcast domain -> A is correct.

Both router and switch can break up collision domains so there is only 1 collision domain on the left of the router (because hub doesn’t break up collision domain) and there are 6 collision domains on the right of the router (1 collision domain from e1 interface to the switch + 5 collision domains for 5 PCs in Production) -> F is correct.

Question 8

Explanation

Modern Ethernet networks built with switches and full-duplex connections no longer utilize CSMA/CD. CSMA/CD is only used in obsolete shared media Ethernet (which uses repeater or hub).

Question 9

Explanation

Each port of a switch is a separate collision domain. This switch uses two ports (for 5 hosts) so there are two collision domains in total.

Question 10

Explanation

At the end of each frame there is a Frame Check Sequence (FCS) field. FCS can be analyzed to determine if errors have occurred. FCS uses cyclic redundancy check (CRC) algorithm to detect errors in the transmitted frames. Before sending data, the sending host generates a CRC based on the header and data of that frame. When this frame arrives, the receiving host uses the same algorithm to generate its own CRC and compare them. If they do not match then a CRC error will occur.

Ethernet802.3_Frame_Format.jpg

Preamble is used to indicate the start of the frame by arranging the first 62 bits as alternating “1/0s” and the last two bits as “1”s. Like so, 010101010101010………………………10101011. Therefore when the receiving end sees the “11” it knows where the actual Ethernet header starts. The alternating 1s and 0s will also allow the two endpoints to sync their internal clocks. In summary, preamble is used for synchronization.

The “Type/Length” field is used to indicate the “Type”of the payload (Layer 3 protocol) which is indicated as a Hexadecimal value.

Note: Ethernet II uses “Type” while the old Ethernet version use “Length”

 

Comments (50) Comments
Comment pages
1 18 19 20 21 22 2988
  1. Rashika Agarwal
    August 13th, 2019

    Hi can someone please share the latest CCNA routing and switching dumps at {email not allowed}

  2. Help me!
    August 21st, 2019

    I not understan this test.

  3. Sabin
    August 22nd, 2019

    Please can I get latest CCNA routing and switching dumps. My email: sabinbhandari(at)gmail(dot)com

  4. ibrahim
    August 25th, 2019

    Please can I get latest CCNA routing and switching dumps. My email: ib.rasheed(at)gmail.com

  5. Houston
    August 26th, 2019

    Please can I get latest CCNA routing and switching dumps. My email: houston.matthews 533(@)gmail(.)com

  6. RAY
    August 28th, 2019

    Please can I get latest CCNA routing and switching 200-125 dumps. My email: mart_ray21(@)yahoo(.)com

  7. Oscar M
    August 28th, 2019

    Please can I get latest CCNA routing and switching 200-125 dumps. My email: {email not allowed}

  8. Anonymous
    August 28th, 2019

    Please can I get latest CCNA routing and switching 200-125 dumps. My email: oscarmorgado8(@)gmail(.)com

  9. kamal
    August 28th, 2019

    kindly share ccna latest dump to me. im taking the exam next month huzaifah21(@)yahoo.com

  10. Jean
    August 31st, 2019

    I am studying for my ccna test, after seeing your comments am encouraged to study even harder. Can someone share with me a good advice where i should focuse. drop me a mail {email not allowed} please

  11. Jean
    August 31st, 2019

    mail me the here
    Mockson291 at gmail . com

  12. zaid abdullahi
    September 3rd, 2019

    Please can I get latest CCNA routing and switching dumps. My email: {email not allowed}

  13. Flimmy
    September 5th, 2019

    Requesting 200-125 PDF, please: flimmyflam (at) mail (dot) com. Thanks!

  14. Fortuney
    September 6th, 2019

    Please can I get latest CCNA routing and switching dumps. My mail kassekab(at)gmail(dot)com

  15. bharadhwaj
    September 6th, 2019

    hai could u please provide CCNA lateest dumps

  16. Anonymous
    September 6th, 2019

    Please can I get latest CCNA routing and switching dumps. My email sebrownuniteone(@)gmail.com

  17. Freeman
    September 11th, 2019

    Hi, Please can I get latest CCNA routing and switching dumps. my email freemanmalisa(@)gmail(dot)com

  18. Alok
    September 11th, 2019

    Hi, Please can I get latest CCNA routing and switching 200-125 dumps. my email alssharmag43(@)gmail(dot)com

  19. Alok
    September 11th, 2019

    Hi 9tut Admins,

    By when latest Aug 2019 dumps for CCNA R&S 200-125 will be uploaded????

    Regards,
    Alok

  20. justud
    September 15th, 2019

    please send me the dumps. justud27 at gmail dot com

  21. Anonymous G
    September 16th, 2019

    Hello, could you pretty please email me the latest CCNA routing and switching 200-125 dumps.
    I would be very grateful. geortapo(@)gmail(dot)com

  22. Anonymous
    September 17th, 2019

    Hi, I will be taking the test next week. Please share the latest dumps CCNA200-125 RnS. My email id is rohitroy(dot)1258(@)gmail(.)com

  23. Anonymous
    September 17th, 2019

    hello please can i get the latest ccna 200-125. email nimi2 (at) hotmail(.)com

  24. vignesh
    September 18th, 2019

    Please can I get latest CCNA routing and switching dumps. My email saravananvignesh16(@)gmail(dot)com

  25. Anonymous
    September 18th, 2019

    Hi, can someone send to me a copy of CCNA R&S dumps to my email wreckedit15(at)gmail(dot)com?

  26. farah shnain
    September 18th, 2019

    please can I get latest CCNA routing and switching dumps . my email shnainfarah(AT)yahoo(DOT)com

  27. saichand
    September 19th, 2019

    please can i get latest CCNA routing and Switching dumps. my email saichandeluri(@)gmail(.)com

  28. mehmet
    September 21st, 2019

    hello , can ı get the latest ccna 200-125 dump my email address {email not allowed}.

  29. Cornboy
    September 22nd, 2019

    can someone send me dump, please

    carringtonco @ gmail

  30. Othmane
    September 24th, 2019

    Hello could someone send me the latest dump please othmane.mamdouh @ gmail
    Thank you

  31. Benji
    September 25th, 2019

    Hello could someone send me the latest dump please “poleogen(AT)gmail(DOT)com”
    Thank you

  32. Harsh
    September 26th, 2019

    Can someone send me the latest and valid dump at ss_shine at yahoo dot com

  33. Harsh
    September 26th, 2019

    Which one is the latest dump, please provide vce file name.

  34. Anonymous
    September 28th, 2019

    Please can I get latest CCNA routing and switching dumps. My email: zauisio.web@ gmail

  35. sj
    September 29th, 2019

    Hello, Can someone send me the latest and valid dump Please.
    my email jeseok0002(@)naver(.)com

  36. Ad
    September 30th, 2019

    Hi everybody,
    I’m new here, so can anyone telling me why the site doesn’t write the questions?

  37. Matthias
    September 30th, 2019

    Hey, can someone send me the latest dumps for the CCNA?
    THANKS!!

    matthias-klausser at web dot de

  38. Anonymous
    October 1st, 2019

    Please can I get latest CCNA routing and switching 200-105 dumps.

    Thanx in advance

    robert2go(at)wp dot pl

  39. vio
    October 4th, 2019

    lotusviolet (at) gmail
    Also where are the questions for the above answers?

  40. mireki
    October 4th, 2019

    Please can I get latest CCNA routing and switching dumps. My email: mirekivalla(at)gmail(dot)com

  41. sagerjo
    October 5th, 2019

    Hi!
    Please, can someone send me the latest dumps CCNA 200-125?
    My email: mmci 1045 (@) g mail (dot) com

    Thanks a lot.

  42. Telthanya
    October 7th, 2019

    Hi,

    Please, Can I get latest CCNA routing and switching 200-105 dumps?
    My Email : prisonerpriest(at)hotmail(dot)com

    Thanks in advance
    Telthanya

  43. ammar
    October 7th, 2019

    can you please share with me the latest dump for 200-125?

    Ammar.abughanem () gmail

  44. Bonasse
    October 7th, 2019

    Please can you share with me the latest 200-125 dumps?

    logabonasse @ gmail dot com

    {email not allowed}

  45. Shabbir Khan
    October 8th, 2019

    Hello all;
    Can any share the Latest CCNA dumps. My email is {email not allowed}

  46. Shabbir Khan
    October 8th, 2019

    Hello all;
    Can any share the Latest CCNA(Routing & Switching) dumps. My email is {email not allowed}

  47. Shabbir Khan
    October 8th, 2019

    Hello all;
    Can anyone share the Latest CCNA(Routing & Switching) dumps. My email is {email not allowed}

  48. Shabbir Khan
    October 8th, 2019

    Hello all;
    Can anyone share the Latest CCNA(Routing & Switching) dumps. My email is sakhan993(@)gmail(.)com

  49. Anonymous
    October 8th, 2019

    Hello all;
    Can anyone share the Latest CCNA(Routing & Switching) dumps. My email is epicdark14(@)hotmail(.)com

  50. Anonymous
    October 10th, 2019

    Dear All how are you plz send me ccna latest dump mohd. {email not allowed}

Comment pages
1 18 19 20 21 22 2988
Add a Comment