Home > CCNA – IPv6


March 13th, 2015 Go to comments

Note: If you are not sure about IPv6, please read our IPv6 tutorial.

Question 1


Answer B is not correct because it has a letter “G”.

Answer C is not correct because it has a letter “H”.

Answer D is not correct because it has two “::”.

Question 2

Question 3

Question 4

Question 5

Question 6


Anycast IPv6 addresses are 128-bit identifiers for interfaces and sets of interfaces. A packet sent to an anycast address is delivered to one of the interfaces identified by that address (the “nearest” one, according to the routing protocols’ measure of distance)

Question 7

Question 8


The range of IPv6 link-local address (similar to the Windows auto-configuration IP address of 169.254.x.x.) is FE80::/10. For more information about IPv6, please read my IPv6 tutorial.

Question 9


An example of configuring RIPng (similar to RIPv2 but is used for IPv6) is shown below:

Router(config)#ipv6 unicast-routing (Enables the forwarding of IPv6 unicast datagrams globally on the router)
Router(config)#interface fa0/0
Router(config-if)#ipv6 rip 9tut enable (9tut is the process name of this RIPng)

Question 10


Below is the list of common kinds of IPv6 addresses:

Loopback address ::1
Link-local address FE80::/10
Site-local address FEC0::/10
Global address 2000::/3
Multicast address FF00::/8

From the above table, we learn that A and D are correct while B and C are incorrect. Notice that the IPv6 unicast loopback address is equivalent to the IPv4 loopback address, The IPv6 loopback address is 0:0:0:0:0:0:0:1, or ::1.

E is not correct because of anycast addresses which are indistinguishable from normal unicast addresses. You can think of anycast addresses like this: “send it to nearest one which have this address”. An anycast address can be assigned to many interfaces and the first interface receives the packet destined for this anycast address will proceed the packet. A benefit of anycast addressing is the capability to share load to multiple hosts. An example of this benefit is if you are a Television provider with multiple servers and you want your users to use the nearest server to them then you can use anycast addressing for your servers. When the user initiates a connection to the anycast address, the packet will be routed to the nearest server (the user does not have to specify which server they want to use).

Comments (36) Comments
Comment pages
1 2 3 1763
    December 2nd, 2015

    THE RIGHT answer!!

    I think the right answers are: b and E (OSPFv3 is ospf for IPv6)..

    eigrp and ospf can use both, ipv4 (EIGRP and OSPFv2) and ipv6 (EIGRP for IPv6 and OSPFv3)

  2. vin
    January 11th, 2016

    Anyone gave CCNA exam in 2016?
    Does questions updated?

  3. santosh
    February 10th, 2016

    Hey guys… planning to take the CCNA exam next week…. am new to this website… and am quite confused how to study ….. i don’t see any questions but only the answers… could someone guide me how to study ????

  4. al
    February 15th, 2016

    i saw only answer where is the question ?

  5. Sush
    April 20th, 2016

    Yeah, its showing only answer so where is the questions?

  6. Sush
    April 20th, 2016

    Hey guys, what is ACL 1, ACL 2 (mod 3), OSPF same, EIGRP New question? I actually getting confused? Could some guys provide me about ACL 1, ACL 2 (mod 3), OSPF same, EIGRP New question. I WILL BE GRATEFUL TO YOU. THANK YOU.

  7. shee
    May 6th, 2016

    hi, do know have question for latest CCNA exam 2016 coz i need to exam soon ….

  8. Anonymous
    May 28th, 2016

    kindly share latest dumps {email not allowed}

  9. mustafa
    June 29th, 2016

    where are the questions

  10. Zdeslav
    July 9th, 2016

    please send me any one 200-120 latest dump. Thanks
    {email not allowed}

  11. Zdeslav
    July 9th, 2016

    please send me any one 200-120 latest dump
    zdeslavkossi @ gmail.com

  12. Ted
    July 15th, 2016

    google gratis exam 200-120

  13. mas
    July 21st, 2016

    Dear All

    I need latest Dumps of CCNA ,will be thankful to you {email not allowed}

  14. micky
    July 22nd, 2016

    please send me the latest dumps
    {email not allowed}

  15. micky
    July 22nd, 2016

    onyimire @ gmail . com

  16. Ramone
    August 4th, 2016

    Anyone know which one is the correct and why?
    Which IPv6 address is valid? A. 2031:0:130F::9C0:876A:130B
    B. 2001:0DB8:0000:130F:0000:0000:08GC:140B
    C. 2001:0DB8:0:130H::87C:140B
    D. 2031::130F::9C0:876A:130B

  17. CCNA 200-120
    August 4th, 2016

    Dear All,

    My honest request, could anyone of you send me the CCNA 200-120 latest dumps to my email address, {email not allowed}, I would be very grateful to them.

  18. khalid
    August 8th, 2016

    hi Ramon,
    A. 2031:0:130F::9C0:876A:130B = 2031:0:130F:0:0:9C0:876A:130B corect
    B. 2001:0DB8:0000:130F:0000:0000:08GC:140B corect, it is opianal to use 0 or ::
    C. 2001:0DB8:0:130H::87C:140B incorect: no “H” in hexadecimal: A B C D E F only
    D. 2031::130F::9C0:876A:130B incorect: :: repeated 2 times

  19. Anonymous
    August 13th, 2016

    please send latest dumps to {email not allowed}

  20. otherguy
    August 17th, 2016

    took 200-102 today … a looot of Q on Frame Relay. Had 47q and 2sims, both on FR. Also a huge part was on STP/RSTP — 3q on EIGRP and 4 or 5 on OSPF only :/ probably get set of questions due to new ccna / icnd2, so “old” guys have time to recertify :D almost all of the 9tut RSTP and STP, none of the Q on IPv6

  21. ASM
    August 31st, 2016

    if you need any help on how to configure IPv6 OSPF V3 , please check out this link


  22. Shipan Sarma
    September 2nd, 2016

    in 9tut.com Questions are not visible

  23. 9tut
    September 2nd, 2016

    @Shipan: You can download the questions at: http://congressreiki.ranm.org/?all=ccna-questions-and-answers

  24. Tiago
    October 9th, 2016

    Question 7 (Q7)
    Which three approaches can be used while migrating from an IPv4 addressing scheme to an IPv6
    scheme? (Choose three)

    The correct answer is B,D,F. Please take a look int his link:

    It says: “Three main options are available for migration to IPv6 from the existing network infrastructure: dual-stack network, tunneling, and translation.”

  25. faizanum123
    November 4th, 2016

    how to read question? @tiago@

  26. Lo Sing
    November 11th, 2016

    Passed the CCNA Finally! I had to take the CCNA twice, as I failed on my first attempt. However for my second, I used the e8ay dump to study the update that happened for the CCNA and passed the exam finally :D All Questions came from the dump. The e8ay dump has a total of 142 questions (58 + 84 updated questions) and the 4 variations of the ACL sims.

    Information to the exam:

    54 MC Questions
    1 ACL simulation
    1 EIGRP TSHOOT Simlet
    1 OSPF TShoot Simlet
    1 RIPv2 Simlet

    Total of 58 questions.

    If you would like to check out the materials I used, here you go:

    e8ay.com/itm/200-125-v3-Dump-/322325097800? (change the “8” to a “b”)

    Good Luck!

  27. Lo Sing
    November 15th, 2016

    I thank this helpful community and kind people providing information to others to help pass the exam! I now am CCNA Certified as I passed my CCNA this morning! I used the e8ay link provided by others to pass the exam as well. Gotta say the 139Q dump is accurate!

  28. Charrisse
    November 29th, 2016

    I passed the exam today as well! Lo Sing’s material is legit. Was skeptical at first but just saw that it was 8 bucks and thought why not try. Turned out to be a valid dump! Would say go with the e8ay dump but there is other useful materials out here. Onto my CCNP Route!

  29. Wacky Techy
    December 2nd, 2016

    Passed using “Lo Sing” e8ay link. Still very much valid. However, looks like the link got updated. Here is the link if you guys want to use:
    e8ay.com/itm/322336782526? (change the “8” to a “b”)

    Good Luck!

  30. Mayori
    December 13th, 2016

    I passed the written CCNA Data Center 640-916 exam by scoring 95%. Most of the questions are from the http://www.grades4sure.com/640-916-exam-questions.html dumps, though the sequences of choices are changed, so it is better to understand the concepts beforehand and go through the dumps so that you will not be surprised in the exam.

  31. TOM
    December 22nd, 2016

    for thoese of you who want to gain a deep understanding of IPv6 here is course

  32. LadyAggy
    June 9th, 2017

    Hey all,
    Kindly share the latest dump for CCNA 200-125…! via {email not allowed}

    Has anyone ever used Cisco damps/Practise exams for ccna…? What is the Pass guarantee ??

  33. LadyAggy
    June 9th, 2017

    use this for LadyAggy…latest damp request.

    jndaliagatha at gmail dot comm

  34. Sandy
    September 13th, 2018

    Confirming the 552q dumps are valid.

  35. Lorena
    January 20th, 2019

    Someone could share the 552q dumps?.

  36. Cosmedica Transplante Capilar
    March 16th, 2019
Comment pages
1 2 3 1763
Add a Comment