Home > OSI Model Tutorial

OSI Model Tutorial

November 2nd, 2011 Go to comments

Welcome to the most basic tutorial for networker! Understanding about OSI model is one of the most important tools to help you grasp how networking devices like router, switch, PC… work.

Let’s take an example in our real life to demonstrate the OSI model. Maybe you have ever sent a mail to your friend, right? To do it, you have to follow these steps:

1. Write your letter
2. Insert it into an envelope
3. Write information about sender and receiver on that envelope
4. Stamp it
5. Go to the post office and drop it into a mail inbox

From the example above, I want to imply we have to go through some steps in a specific order to complete a task. It is also applied for two PCs to communicate with each other. They have to use a predefined model, named OSI, to complete each step. There are 7 steps in this model as listed below:


This is also the well-known table of the OSI model so you must take time to learn by heart. A popular way to remember this table is to create a fun sentence with the first letters of each layer. For example: All People Seem To Need Data Processing or a more funny sentence sorted from layer 1 to layer 7: Please Do Not Throw Sausage Pizza Away.

There are two notices about this table:

1. First, the table is arranged from top to bottom (numbering from 7 to 1). Each step is called a “layer” so we have 7 layers (maybe we usually call them “layers” to make them more… technical ^^).

When a device wants to send information to another one, its data must go from top to bottom layer. But when a device receives this information, it must go from bottom to top to “decapsulate” it. In fact, the reverse action at the other end is very natural in our life. It is very similar when two people communicate via mail. First, the writer must write the letter, insert it into an envelope while the receiver must first open the envelope and then read the mail. The picture below shows the whole process of sending and receiving information.


Note: The OSI model layers are often referred to by number than by name (for example, we refer saying “layer 3” to “network layer”) so you should learn the number of each layer as well.

2. When the information goes down through layers (from top to bottom), a header is added to it. This is called “encapsulation” because it is like wrapping an object in a capsule. Each header can be understood only by the corresponding layer at the receiving side. Other layers only see that layer’s header as a part of data.


At the receiving side, corresponding header is stripped off in the same layer it was attached. This process is called “decapsulation”.

Understand each layer

Layer 7 – Application layer

This is the closest layer to the end user. It provides the interface between the applications we use and the underlying layers. But notice that the programs you are using (like a web browser – IE, Firefox or Opera…) do not belong to Application layer. Telnet, FTP, email client (SMTP), HyperText Transfer Protocol (HTTP) are examples of Application layer.

Layer 6 – Presentation layer

This layer ensures the presentation of data, that the communications passing through are in the appropriate form for the recipient. In general, it acts as a translator of the network. For example, you want to send an email and the Presentation will format your data into email format. Or you want to send photos to your friend, the Presentation layer will format your data into GIF, JPG or PNG… format.

Layer 5 – Session layer

Layer 5 establishes, maintains and ends communication with the receiving device.

Layer 4 – Transport layer

This layer maintains flow control of data and provides for error checking and recovery of data between the devices. The most common example of Transport layer is Transmission Control Protocol (TCP) and User Datagram Protocol (UDP).

Layer 3 – Network layer

This layer provides logical addresses which routers will use to determine the path to the destination. In most cases, the logic addresses here means the IP addresses (including source & destination IP addresses).

Layer 2 – Data Link Layer

The Data Link layer formats the message into a data frame, and adds a header containing the hardware destination and source address to it. This header is responsible for finding the next destination device on a local network.

Notice that layer 3 is responsible for finding the path to the last destination (network) but it doesn’t care about who will be the next receiver. It is the Layer 2 that helps data to reach the next destination.

This layer is subdivide into 2 sub-layers: logical link control (LLC) and media access control (MAC).

The LLC functions include:
+ Managing frames to upper and lower layers
+ Error Control
+ Flow control

The MAC sublayer carries the physical address of each device on the network. This address is more commonly called a device’s MAC address. MAC address is a 48 bits address which is burned into the NIC card on the device by its manufacturer.

Layer 1 – Physical layer

The Physical Layer defines the physical characteristics of the network such as connections, voltage levels and timing.

To help you remember the functions of each layer more easily, I created a fun story in which Henry (English) wants to send a document to Charles (French) to demonstrate how the OSI model works.



Lastly, I summarize all the important functions of each layer in the table below (please remember them, they are very important knowledge you need to know about OSI model):

Layer Description Popular Protocols Protocol Data Unit Devices operate in this layer
Application + User interface HTTP, FTP, TFTP, Telnet, SNMP, DNS… Data  
Presentation + Data representation, encryption & decryption

+ Video (WMV, AVI…)
+ Bitmap (JPG, BMP, PNG…)
+ Audio (WAV, MP3, WMA…)

Session + Set up, monitor & terminate the connection session + SQL, RPC, NETBIOS names… Data  
Transport + Flow control (Buffering, Windowing, Congestion Avoidance) helps prevent the loss of segments on the network and the need for retransmission + TCP (Connection-Oriented, reliable)
+ UDP (Connectionless, unreliable)
Network + Path determination
+ Source & Destination logical addresses
+ IP
+ AppleTalk
Packet/Datagram Router
Data Link

+ Physical addresses

Includes 2 layers:
+ Upper layer: Logical Link Control (LLC)
+ Lower layer: Media Access Control (MAC)

+ WAN (HDLC, PPP, Frame Relay…)
Frame Switch, Bridge

Encodes and transmits data bits

+ Electric signals
+ Radio signals

+ FDDI, Ethernet Bit (0, 1) Hub, Repeater…

Note: In fact, OSI is just a theoretical model of networking. The practical model used in modern networks is the TCP/IP model. You may think “Hm, it’s just theoretic and has no use in real life! I don’t care!” but believe me, you will use this model more often than the TCP/IP model so take time to grasp it, you will not regret – I promise :)

Comments (21) Comments
Comment pages
1 20 21 22 912
  1. Jhon Masud
    July 4th, 2018

    Please ,send me the latest dumps for CCNA. My exam will be in the next few days.

  2. Anonymous
    July 12th, 2018

    thank you for your modification

  3. moe
    July 28th, 2018

    Please ,send me the latest dumps for CCNA.My exam will be in the next few days {email not allowed}

  4. moe
    July 28th, 2018

    Please ,send me the latest dumps for CCNA.My exam will be in the next few days moe dot marandi
    @ gmail dot com

  5. Anonymous
    September 12th, 2018

    nice tutorial .

  6. Rey
    September 13th, 2018

    It is so intersting. Well assimilated

  7. abir
    October 8th, 2018

    Please anyone give me latest CCNA dump questions?? Its urgent. {email not allowed}
    Advanced thanks.

  8. Fresh Learner
    November 9th, 2018

    God explanation. Hope this type of information could be expended for all CCNA Chapters.. Thank You

  9. Anonymous
    November 25th, 2018

    Amazing one, very easy specially for the non-techy guys, it made my life easy

  10. ThaeSU
    December 17th, 2018

    please send me latest dump file {email not allowed}

  11. Danish
    December 23rd, 2018

    just love the way you people explaining. i feel a good teacher is there in my computer screen and teaches me. love you 9tut.com

  12. Himu
    January 8th, 2019

    anyone please send the latest dump to himel2063 (@) yahoo (dot) com

  13. Akshay M
    January 17th, 2019

    There are some very good CCNA training courses from Pluralsight, Udemy, and LinkedIn Learning. I suggest you look at OpenCourser to search them.


    There’s a sale for Udemy courses too, so it’s possible to take the classes for only $10. Use the coupon page on enroll page.

  14. abdoul
    February 10th, 2019

    thank you for this tutorial

  15. Anonymous
    February 19th, 2019

    Please, CCENT dump to maxmartin3 at yahoo dot com

  16. amr
    June 12th, 2019

    Please ,send me the latest dumps for ICND 1. My exam will be in the next few days.

  17. meliton
    June 18th, 2019

    Please kindly send me a softcopy latest CCNA dump so i can pass my exam for 2nd take

  18. Anonymous
    July 2nd, 2019

    thanks akshay for opencourser, found some good ones

  19. Anonymous
    July 4th, 2019

    Hello everyone please can someone help me with the latest dumps for CCNA 200-2015
    {email not allowed}

  20. CCNA Exam
    July 27th, 2019

    Hello, Please anyone send me latest dumps for CCNA ?
    email- {email not allowed}

  21. edjorge
    November 13th, 2019

    olá, por favor, alguém pode enviar-me os últimas actualizaçoes para o CCNA ?
    email {email not allowed}

Comment pages
1 20 21 22 912
Add a Comment