Home > Share your CCNA v3.0 Experience

Share your CCNA v3.0 Experience

August 23rd, 2016 Go to comments

The CCNA 200-125 has come to replace the old CCNA 200-120 exam. We create the “Share your CCNA v3.0 Experience” for everyone to share their experience after taking this exam.

Note: We have a topic of Frequently Asked Questions & Tips for CCNA learners, surely you will find valuable information about the CCNA exam there.

Please share with us your experience after taking the new CCNA 200-125 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…

Your posts are warmly welcome! Hope you will find useful information from friends who have taken the CCNA exam!

Note: Email is not allowed to show in comment section.

Comments (50) Comments
Comment pages
1 46 47 48 49 2815
  1. Arch
    December 5th, 2018

    Many thanks for your dumps Artur!! I got 95x today

  2. congrats to pass.’
    December 5th, 2018

    Passed the exam to day 9xx/1000.

    Sim labs- Ospf TS, GRE multilink, DHCP, ACL1
    Configuration labs- Ospfv3, VLAN
    D&D- collision domain, TCP&UDP

    Remove**from URL and get free dumps
    https:/*/dri*ve.google*.com/open?id=1K1UwICyU-pPfTtOMeIguhxDNh4dH2Wic

  3. Rafeal
    December 5th, 2018

    Hello everyone !!

    I have updated the new question bank CCNA 200-125, PLEASE REVIEW AND RESEARCH VERY WELL BEFORE MAKING ANY INQUIRIES, I WILL NOT ANSWER UNNECESSARY QUESTIONS !!!.

    SHARED FILES ON MEDIAFIRE:
    ======================

    * Chinese Dumps (2018.12.04) (LAST UPDATE) – Original Chinese Dumps 2018-12-04 VCE and PDFs (*There are new MCQs do not forget to check it*).

    * Chinese Dumps (2018.07.05) (Chinese dumps correction according to my criteria, if the answers are different believe in 9tut) – Original Chinese Dumps 2018-07-05 VCE and PDF + some new questions from the CCNA experience forum 2

    * 9tut Dumps (in format ETE) – Lab and Sim of 9tut all in one (GNS3/Packet Tracer) + D & D of 9tut + 55 Nirav Surya + some new questions from the CCNA experience forum 1.

    ——————————————————————————————————————————————————
    | Everything is compressed in zip, everything modified is based on my own criteria. Here is the link: |
    —————————————————————————————————————————————————————-

    | *htt*p://ww*w.medi*afire.com/fol*der/*s3dqu9b1977e7*/*CCNA*%20200*-125* (remove **** from the URL) |
    —————————————————————————————————————————————————————-

    WARNING:
    ========

    * the command “copy running-config startup-config” or “wr” for OSPFv6 did not work, but I think I received the same points so do not get upset if you do not save and the exam does not stop you !.

    * Do not believe in people who publish links with Google Drive, we do not sell Dumps here, we share it.

    * I do not guarantee other dumps that are not 9tut and Chinese dumps and / or that I have shared.

    * If you have problems with different answers regarding the Chinese dumps, believe in 9tut. If the questions are not in 9tut you should investigate with the theory that shares 9tut, CCNA7, The book shared by Youki, etc.

    TIPS:
    ====

    Study theory. I got the theory of 9TUT and complemented it with CCNA7 (htt*p://ww*w.medi*afire.com/fol*der/*s3dqu9b1977e7*/*CCNA*%20200*-125*) its dynamic theory, the questions of previous versions of CCNA and the videos are very good and free . Also, solve all 9tut and Chinese questions, DO NOT MEMORIZE. Another one that can help you is the CCNA book that is in the Youki files, which is very good and the questions. All this is to give more solidity to the topics they learned.

    REMEMBER THAT IF YOU STUDY MORE, YOU WILL HAVE GREATER CONFIDENCE IN THE EXAM AND GREATER SUCCESS.

    Success for everyone.

    Sincerely

    Rafael.

  4. Anonymous
    December 5th, 2018

    b i t . d o / eBkga

  5. Latila Juky
    December 5th, 2018

    Hello all

    The dumps contain PDF + VCE Test Simulator

    The dumps have been updated on this month with the new question

    I passed the exam Today using the dumps below

    Remove SPACE and download

    b i t . d o / eBkga

  6. Anonymous
    December 6th, 2018

    setwefs

  7. Anonymous
    December 6th, 2018

    Anonymous July 1st, 2018
    Which are the three major components of cisco network virtualization? (Choose Three.)

    A. network access control
    B. path isolation
    C. virtual network services
    D. policy enforcement
    E. authentication services
    F. network resilience
    Correct Answer: ABD
    or

    What are the three major components of cisco network virtualization? (Choose Three.)
    A. network access control
    B. path isolation
    C. virtual network services
    D. policy enforcement

    Correct Answer: ABC

    A network engineer wants to allow a temporary entry for a remote user with a specific username and
    password so that the user can access the entire network over the internet. Which ACL can be used?
    A. reflexive
    B. extended
    C. standard
    D. dynamic

    Correct Answer: D

    A network engineer wants to allow a temporary entry for a remote user with a specific usename and password so that the user can access the entire network over the internet.
    Which ACL can be used?
    A. reflexive
    B. extended
    C. standard
    D. dynamic
    Correct Answer: A

    Which three technical services support cloud computing?
    A. networksx-monitored power sources
    B. layer 3 network routing
    C. ip localization
    D. redundant connections
    E. VPN connectivity
    F. extended SAN services

    Correct Answer: DEF

  8. Congratulations To Pass exam.
    December 6th, 2018

    Passed the exam to day 9xx/1000.

    Sim labs- Ospf TS, GRE multilink, DHCP, ACL1
    Configuration labs- Ospfv3, VLAN
    D&D- collision domain, TCP&UDP

    Remove**from URL and get free dumps
    https:/*/dri*ve.google*.com/open?id=1K1UwICyU-pPfTtOMeIguhxDNh4dH2Wic

  9. doka
    December 6th, 2018

    What are the three major components of cisco network virtualization? (Choose Three.)
    A. network access control
    B. path isolation
    C. virtual network services
    D. policy enforcement

    Correct Answer: ABC

    A network engineer wants to allow a temporary entry for a remote user with a specific username and
    password so that the user can access the entire network over the internet. Which ACL can be used?
    A. reflexive
    B. extended
    C. standard
    D. dynamic

    Correct Answer: D

  10. Cheng
    December 6th, 2018

    Artur’s dumps totally valid!

  11. OB
    December 6th, 2018

    Hi, Please can i kindly have link to download the book shared by Youki.

  12. OB
    December 6th, 2018

    @Rafael

    Hi, Please can i kindly have link to download the book shared by Youki.

  13. Rafael
    December 6th, 2018

    the link is not valid

    Cisco Microsoft Juniper Huawei NOT CHINESE

  14. Ana
    December 6th, 2018

    Passed this morning using the dumps posted above by Latila

    Remove SPACE and download

    b i t . d o / eBkga

  15. Ehab
    December 6th, 2018

    Latest CCNA Dump
    2018_12_04

    Direct link
    CCNA200_125 Chinese_Dump
    573Q

    www. EhabBooks . com /downloads/ccna/CCNA_2018_12_04_Chinese_Dump.rar

  16. Haz
    December 6th, 2018

    Passed today with 9xx. Used 9tut and the latest chinese dumps from rafael – only about 3-4 questions i’ve never seen before. Had 5 labs (didn’t know that was possible) – OSPF, ACL, EIGRP, VTP, GRE.

    All of the labs were nearly word for word on here so definitely practise the SIMS and you’ll be fine.

  17. Anonymous
    December 6th, 2018

    Q1: Which command is used to display the collection of OSPF link states?
    A. Show ip ospf link-state
    B. Show ip ospf lsa database
    C. Show ip ospf neighbors
    D. Show ip ospf database
    B

    Q2: The company internetwork is subnetted using 29 bits. Which wildcard mask should be used to configure an extended access list to permit or deny access to an entire subnetwork?
    A. 255.255.255.224
    B. 255.255.255.248
    C. 0.0.0.224
    D. 0.0.0.8
    E. 0.0.0.7
    E

    Q3: What command is used to verify the DLCI destination address in a Frame Relay static configuration?
    A. Show frame-relay pvc
    B. Show frame-relay lmi
    C. Show frame-relay map
    D. Show frame-relay end-to-end
    A

    Q4: On a Cisco switch, which protocol determines if an attached VoIP phone is from Cisco or from another vendor?
    A. CDP
    B. RTP
    C. UDP
    D. TCP
    A

    Q5: Which form of NAT maps multiple private IP addresses to a single registered IP address by using different ports?
    A. Static NAT
    B. Dynamic NAT
    C. Overloading
    D. Overlapping
    E. Port loading
    C

    Q6: Which address prefix does OSPFv3 use when multiple IPv6 address is configured on a single interface?
    A. All prefix on the interface
    B. The prefix that administrator configure for OSPFv3 use
    C. The lowest prefix on the interface
    D. The highest prefix on the interface
    A

    Q7: What SNMP message alerts the manager to a condition on the network?
    A. Response
    B. Get
    C. Trap
    D. Capture
    C

    Q8: A department decides to replace its hub with a Catalyst 2950 switch that is no longer needed by another department. To prepare the switch for installation, the network admin has erased the startup configuration and reloaded the switch. However, PCs that are connected to the switch experience various connectivity problems. What is a possible cause of the problem?
    A. The vlan database was not erased.
    B. The management vlan is disabled.
    C. The running configuration should have been erased.
    D. The mode button was not pressed when the switch was reloaded.
    E. The switch was not configured with an IP address or a default gateway.
    A

    Q9: When a device learns multiple routes to a specific network, it installs the route with?
    A. Longest bit match (highest subnet mask)
    B. Lowest AD
    C. Lowest metric
    D. Equal load balancing
    B

    Q10: What is the result of issuing the frame-relay map ip 192.168.2.2 202 broadcast command?
    A. Defines the destination IP address that is used in all broadcast packet on DLCI 202
    B. Defines the source IP address that is used in all broadcast packets on DLCI 202
    C. Defines the DLCI on which packets from the 192.168.1.2 IP address are received
    D. Defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP address
    D
    This command identifies the DLCI that should be used for all packets destined to the 192.168.1.2 address. In this case, DLCI 202 should be used

    Q11: On which options are standard access lists based?
    A. Destination address and wildcard mask
    B. Destination address and subnet mask
    C. Source address and subnet mask
    D. Source address and wildcard mask
    C

    Q12: If a host experiences intermittent issues that relate to congestion within a network while remaining connected, what could cause congestion on this LAN?
    A. Half-duplex operation
    B. Broadcast storms
    C. Network segmentation
    D. Multicasting
    B

    Q13: What are two characteristics of a switch that is configured as a VTP client? Choose two.
    A. If a switch twdhat is configured to operate in client mode cannot access a VTP server, then the switch reverts to transparent mode.
    B. On switches that are configured to operate in client mode, vlans can be created, deleted, or renamed locally.
    C. The local vlan configuration is updated only when an update that has a higher configuration revision number is received.
    D. VTP advertisements are not forwarded to neighboring switches that are configured in VTP transparent mode.
    E. When switches in VTP client mode are rebooted, they send a VTP advertisement request to the VTP servers.
    C E

    Q14: What are three valid reasons to assign ports to VLANs on a switch? Choose three.
    A. To make VTP easier to implement
    B. To isolate bdwroadcast traffic
    C. To increase the size of the collision domain
    D. To increase network security
    E. To logically group hosts according to function
    B D E

  18. DUMPS DOWNLOAD 100%
    December 6th, 2018

    Passed the exam to day 9xx/1000.

    config labs : ospfv3 and vlan
    trouble shoot lab : dhcp, rip , eigrp gre
    drag and drop BGP , tcp udp protocols
    SIM:IPv6 OSPF, DHCP, VLAN, EIGRP

    Remove**from URL and get free dumps
    https:/*/dri*ve.google*.com/open?id=1K1UwICyU-pPfTtOMeIguhxDNh4dH2Wic

  19. Top
    December 6th, 2018

    Please send updated dump to {email not allowed}

    Good luck to all

  20. C-Head
    December 6th, 2018

    Hello guys. Guess what!. After two months I got a a new job in Telecommunications, and I’m happy with this new job. My job is to troubleshoot different issues with switches of different brands. Now, I’m looking forward to improve my skills and job objectives.
    Does it worth to continue studying to get the CCNP certification? I know there are other courses like CCNA security, CCNA cloud, but I don’t see any CCNA voice certification. What do you think?

  21. sara
    December 6th, 2018

    The answer is B or D?

    Which interface counter can you use to diagnose a duplex mismatch problem?
    A. runts
    B. CRC errors
    C. no carrier
    D. late collisions
    E. deferred
    F. giants

  22. deen
    December 7th, 2018

    I share 200-125 exam and i passed today with 80% marks now i am happy with my result. https://www.google.com/maps/d/u/0/edit?mid=1carOCDQC80mq9c9uivjEd9pDj14IWGuH&ll=58.610496986064284%2C-158.81583240000003&z=4

  23. Converge Marikina Bogus
    December 7th, 2018

    @Rafael thanks a lot my good friend.

  24. Joseph
    December 7th, 2018

    @Sara correct answer is D “late collisions”. You can check it out with “show interface F0/0” for example. Remember that an interface can be in UP/UP but a could have a dúplex mismatch. In this case the interface will work “slower” because the interface configured in “half duplex mode” will use CSMA/CD (so collisions can happen).

  25. Joseph
    December 7th, 2018

    @Sara CRC errors can happen when there is some external interference. For instance, an UTP cable very close to high voltaje cables in a factory.

  26. Zyfah
    December 7th, 2018

    @Artur could you please share your the new dump for me.
    my e-mail is {email not allowed}.

  27. link
    December 7th, 2018

    @Artur Could you share valid dump ? pkmeld (at) hotmail . com

  28. Ania
    December 7th, 2018

    Hello all

    The dumps contain PDF + VCE Test Simulator

    The dumps have been updated on this month with the new question

    I passed the exam Today using the dumps below

    Remove SPACE and download

    b i t . d o / eBkgaf

  29. irken
    December 7th, 2018

    Hi Ania, the link doesn’t work

  30. Anonymous
    December 7th, 2018

    I had EIGRP GRE, IPv6 OSPF Sim, RIPv2 Troubleshooting Sim, EIGRP Troubleshooting Sim, Access List Sim 2, Access List Sim

    1) EIGRP GRE had some very minor changes but the main concept was the same.
    2) IPv6 OSPF had command alreadsfy configured and at last question the configuration was changed (OSPFv3 was in fact configured under interface but with a wrong area e.g area 4 instead of 0 and that was why neighborship with BR could not be established- you have to correct it manually)
    3) RIPv2 – one or two questions, I don’t really remember, were different, just be careful, the way to come up with the right answer is to check running-config carefully nothing to panic about.
    4) EIGRP Troubleshouting , questions were the same, however answers were all (or 3 out of them ) different, check carefully (e.g some different networks commands were missing-do not remember which ones, K values were mismatched and traffic was EQUALLY load balanced)
    5) Access-list 2 -> be careful on the host it asks and also it gives you all the IP destination addresses you needed
    6) ACL 1 was also modified a bit (in 1st question the trick is that instead of changing the ACL to do what it asks to, you just have to use the same ACL but instead of outbound it has to be indbound- of course they give you as an option such an answer .

    General advice:
    1) Study carefully from books or tutorial videos and try to understand all the concepts as well as possible
    2) Use 9TUT material to review what you know and practice
    3) Do not try to memorize labs/sims answers, try to understand fully the concept so you can answer correctly and think critically – memorizing anything apart from maybe some D&Ds can be a disaster to your result. BE CRITICAL :)
    4) Again, key to success is to use 9TUT as a way to practice and understand technologies and Cisco categories of questions better – AGAIN DO NOT MEMORIZE questions because labs are being modified !
    5) Do not panic and do
    ome new questions but nothing was extreme or too tricky or strange, if you have studied well and have checked 9TUT answers/questions too, you should be good.

    3) Be careful of the labs but don’t let them scare you. I think now there are many new modifications in all ofthem but if you have gone through the labs here and you have fully understood the concept behind each technology/question, it shouldn’t be a problem because the main labs/sims are quite similar.

    I had EIGRP GRE, IPv6 OSPF Sim, RIPv2 Troubleshooting Sim, EIGRP Troubleshooting Sim, Access List Sim 2, Access List Sim

    1) EIGRP GRE had some very minor changes but the main concept was the same.
    2) IPv6 OSPF had command already configured and at last question the configuration was changed (OSPFv3 was in fact configured under interface but with a wrong area e.g area 4 instead of 0 and that was why neighborship with BR could not be established- you have to correct it manually)
    3) RIPv2 – one or two questions, I don’t really remember, were different, just be careful, the way to come up with the right answer is to check running-config carefully nothing to panic about.
    4) EIGRP Troubleshouting , questions were the same, however answers were all (or 3 out of them ) different, check carefully (e.g some diffesdvent netwocscrks coascmmands were missing-do not remember which ones, K asvalues were mismatched and traffic was EQUALLY load balanced)
    5) Access-list 2 -> be careful on the host it asks and also it gives you all the IP destination addresses you needed
    6) ACL 1 was also modified a bit (in 1st question the trick is that instead of changing the ACL to do what it a

  31. las
    December 7th, 2018

    1 . When a router is unable to find a known route in the routing table,how dose it handle the pacet?
    A.It sends the packet to the next hop address
    B.It sends the packet to the gateway of last resort
    C.It discards the packet
    D.It sends the packet over the route with the best metric

    2 . How can you disable DTP on a switch port?
    A.Configure the switch port as a trunk.
    B.Add an interface on the switch to a channel group.
    C.Change the operational mode to static access
    D.Change the administrative mode to access
    3 . which statement about upgrading a cisco IOS device with TFTP server ?
    A.the operation is performed in active mode
    B.the operation is performed in unencrypted format
    C.the operation is performed in passive mode
    D.the cisco IOS device must be on the same LAN as the TFTP server
    4 . It you change the weight and distance parameters on a device with an establshed BGP neighbor, which additional task must you perfom to allow the two devices to continue exchanging routes?
    A.Reset the BGP connections on the device
    B.Reset the gateway interface
    C.Clear the IP routes on the device
    D.Change the weight and distance settings on the other device to match

    5 . For which two reasons might you choose chassis aggregation instead of stacking switches?(Choose two)
    A.to allow hot-swapping modules
    B.to increase the number of devices in use
    C.to avoid the use of a centralized configuration manager
    D.to avoid relying solely on Ethemet interfaces
    E.to increase the maximum port count

    correct answer for this question…..
    1 . When a router is unable to find a known route in the routing table,how dose it handle the pacet?
    A.It sends the packet to the next hop address
    B.It sends the packet to the gateway of last resort
    C.It discards the packet
    D.It sends the packet over the route with the best metric

    2 . How can you disable DTP on a switch port?
    A.Configure the switch port as a trunk.
    B.Add an interface on the switch to a channel group.
    C.Change the operational mode to static access
    D.Change the administrative mode to access
    3 . which statement about upgrading a cisco IOS device with TFTP server ?
    A.the operation is performed in active mode
    B.the operation is performed in unencrypted format
    C.the operation is performed in passive mode
    D.the cisco IOS device must be on the same LAN as the TFTP server
    4 . It you change the weight and distance parameters on a device with an establshed BGP neighbor, which additional task must you perfom to allow the two devices to continue exchanging routes?
    A.Reset the BGP connections on the device
    B.Reset the gateway interface
    C.Clear the IP routes on the device
    D.Change the weight and distance settings on the other device to match

    5 . For which two reasons might you choose chassis aggregation instead of stacking switches?(Choose two)
    A.to allow hot-swapping modules
    B.to increase the numberx of devices in use
    C.to avoid the use of a centralized configuration manager
    D.to avoid relying solely on Ethemet interfaces
    E.to increase the maximum port count

  32. DUMPS DOWNLOAD 100%
    December 7th, 2018

    Thank God pass with good marks (980)

    i got EIGRP GRE TS sim,ACL1, ACL2 mod3 ,GRE MUltilink sim,RIPV2 ts sim
    DND – type of cables, QOS, WIRELESS LAN CONTROLLER, BGP

    Remove**from URL and get free dumps
    https:/*/drive*.googl*e.com/open?id=1_w0_Wd9LFty8WGoOSEWe0kPMeU08gPqT

  33. sara
    December 7th, 2018

    Thanks very much @Joseph :)))

  34. sara
    December 7th, 2018

    The right is B or C ?

    Which of the following encrypts the traffic on a leased line?
    A. telnet
    B. ssh
    C. vtp
    D. vpn
    E. dmvp

  35. arik
    December 7th, 2018

    What is the status of port-channel if LACP is misconfigured?
    B or C ?
    A.Forwarding
    B.Errdisabled
    C.Disabled
    D.Enabled

  36. Joseph
    December 7th, 2018

    @arik the status of a misconfigured port-channel (let´s say Po1) is ERRDISABLED. On the other hand, the physical port (let´s say F0/1 for example) will be DISABLED. I think to check the portchannel status the command is this one: “Show interfaces Fx/x etherchannel”

  37. Joseph
    December 7th, 2018

    @Sara the answer is “ssh” since this protocol encrypts the data. You could think about VPN but it is just a method to trasport data from Point A to Point B (tunnel method using for example GRE protocol) but to encrypt the data VPN needs to use IPsec or SSL. If you don´t use any of previous protocols VPN does not encrypts the data.

  38. Pass paper on 7December
    December 8th, 2018

    i have replied all message from my inbox , i need to help peoples , if any want to help , kindly inbox me, in my yestesday paper , i saw 6 labx in my paper , ACL1, DHCP, RIPV2, VLAN(configuration),GRE Multilink, OSPF Neigh,

    syedabdulhaseeb93 at gmail com

  39. Hamsa
    December 8th, 2018

    Artur´s dumps 100% valid (yesterday i killed the exam!!!) thanks 9tut & Artur!

  40. Isabella
    December 8th, 2018

    Hello all

    The dumps contain PDF + VCE Test Simulator

    The dumps have been updated on this month with the new question

    I passed the exam Today using the dumps below

    Remove SPACE and download

    b i t . d o / eBkga

  41. Puci
    December 8th, 2018

    Hi artur, can u share valid dump at a*plovid_1*01@yah*oo.c*om

  42. Surya
    December 8th, 2018

    can anyone give the link for artur’s dumps please?!

  43. ANSWER
    December 8th, 2018

    Arthur is a piece of shit. He begs for money cus he is full of shit. Taking risk by selling at 30euros.

  44. Singh
    December 8th, 2018

    Artur’s dumps is for sale for those asking.

  45. Elisa
    December 8th, 2018

    1 . When a router is unable to find a known route in the routing table,how dose it handle the pacet?
    A.It sends the packet to the next hop address
    B.It sends the packet to the gateway of last resort
    C.It discards the packet
    D.It sends the packet over the route with the best metric

    2 . How can you disable DTP on a switch port?
    A.Configure the switch port as a trunk.
    B.Add an interface on the switch to a channel group.
    C.Change the operational mode to static access
    D.Change the administrative mode to access
    3 . which statement about upgrading a cisco IOS device with TFTP server ?
    A.the operation is performed in active mode
    B.the operation is performed in unencrypted format
    C.the operation is performed in passive mode
    D.the cisco IOS device must be on the same LAN as the TFTP server
    4 . It you change the weight and distance parameters on a device with an establshed BGP neighbor, which additional task must you perfom to allow the two devices to continue exchanging routes?
    A.Reset the BGP connections on the device
    B.Reset the gateway interface
    C.Clear the IP routes on the device
    D.Change the weight and distance settings on the other device to match

    5 . For which two reasons might you choose chassis aggregation instead of stacking switches?(Choose two)
    A.to allow hot-swapping modules
    B.to increase the number of devices in use
    C.to avoid the use of a centralized configuration manager
    D.to avoid relying solely on Ethemet interfaces
    E.to increase the maximum port count

    correct answer for this question…..
    1 . When a router is unable to find a known route in the routing table,how dose it handle the pacet?
    A.It sends the packet to the next hop address
    B.It sends the packet to the gateway of last resort
    C.It discards the packet
    D.It sends the packet over the route with the best metric

    2 . How can you disable DTP on a switch port?
    A.Configure the switch port as a trunk.
    B.Add an interface on the switch to a channel group.
    C.Change the operational mode to static access
    D.Change the administrative mode to access
    3 . which statement about upgrading a cisco IOS device with TFTP server ?
    A.the operation is performed in active mode
    B.the operation is performed in unencrypted format
    C.the operation is performed in passive mode
    D.the cisco IOS device must be on the same LAN as the TFTP server
    4 . It you change the weight and distance parameters on a device with an establshed BGP neighbor, which additional task must you perfom to allow the two devices to continue exchanging routes?
    A.Reset the BGP connections on the device
    B.Reset the gateway interface
    C.Clear the IP routes on the device
    D.Change the weight and distance settings on the other device to match

    5 . For which two reasons might you choose chassis aggregation instead of stacking switches?(Choose two)
    A.to allow hot-swapping modules
    B.to increase the numberx of devices in use
    C.to avoid the use of a centralized configuration manager
    D.to avoid relying solely on Ethemet interfaces
    E.to increase the maximum port count

  46. vder
    December 8th, 2018

    I had EIGRP GRE, IPv6 OSPF Sim, RIPv2 Troubleshooting Sim, EIGRP Troubleshooting Sim, Access List Sim 2, Access List Sim

    1) EIGRP GRE had some very minor changes but the main concept was the same.
    2) IPv6 OSPF had command alreadsfy configured and at last question the configuration was changed (OSPFv3 was in fact configured under interface but with a wrong area e.g area 4 instead of 0 and that was why neighborship with BR could not be established- you have to correct it manually)
    3) RIPv2 – one or two questions, I don’t really remember, were different, just be careful, the way to come up with the right answer is to check running-config carefully nothing to panic about.
    4) EIGRP Troubleshouting , questions were the same, however answers were all (or 3 out of them ) different, check carefully (e.g some different networks commands were missing-do not remember which ones, K values were mismatched and traffic was EQUALLY load balanced)
    5) Access-list 2 -> be careful on the host it asks and also it gives you all the IP destination addresses you needed
    6) ACL 1 was also modified a bit (in 1st question the trick is that instead of changing the ACL to do what it asks to, you just have to use the same ACL but instead of outbound it has to be indbound- of course they give you as an option such an answer .

    General advice:
    1) Study carefully from books or tutorial videos and try to understand all the concepts as well as possible
    2) Use 9TUT material to review what you know and practice
    3) Do not try to memorize labs/sims answers, try to understand fully the concept so you can answer correctly and think critically – memorizing anything apart from maybe some D&Ds can be a disaster to your result. BE CRITICAL :)
    4) Again, key to success is to use 9TUT as a way to practice and understand technologies and Cisco categories of questions better – AGAIN DO NOT MEMORIZE questions because labs are being modified !
    5) Do not panic and do
    ome new questions but nothing was extreme or too tricky or strange, if you have studied well and have checked 9TUT answers/questions too, you should be good.

    3) Be careful of the labs but don’t let them scare you. I think now there are many new modifications in all ofthem but if you have gone through the labs here and you have fully understood the concept behind each technology/question, it shouldn’t be a problem because the main labs/sims are quite similar.

    I had EIGRP GRE, IPv6 OSPF Sim, RIPv2 Troubleshooting Sim, EIGRP Troubleshooting Sim, Access List Sim 2, Access List Sim

    1) EIGRP GRE had some very minor changes but the main concept was the same.
    2) IPv6 OSPF had command already configured and at last question the configuration was changed (OSPFv3 was in fact configured under interface but with a wrong area e.g area 4 instead of 0 and that was why neighborship with BR could not be established- you have to correct it manually)
    3) RIPv2 – one or two questions, I don’t really remember, were different, just be careful, the way to come up with the right answer is to check running-config carefully nothing to panic about.
    4) EIGRP Troubleshouting , questions were the same, however answers were all (or 3 out of them ) different, check carefully (e.g some diffesdvent netwocscrks coascmmands were missing-do not remember which ones, K asvalues were mismatched and traffic was EQUALLY load balanced)
    5) Access-list 2 -> be careful on the host it asks and also it gives you all the IP destination addresses you needed
    6) ACL 1 was also modified a bit (in 1st question the trick is that instead of changing the ACL to do what it a

  47. DUMPS DOWNLOAD 100%
    December 8th, 2018

    Thank God pass with good marks (980).1000

    i got EIGRP GRE TS sim,ACL1, ACL2 mod3 ,GRE MUltilink sim,RIPV2 ts sim
    DND – type of cables, QOS, WIRELESS LAN CONTROLLER, BGP

    Remove**from URL and get free dumps
    https:/*/drive*.googl*e.com/open?id=1_w0_Wd9LFty8WGoOSEWe0kPMeU08gPqT

  48. Ahmed
    December 8th, 2018

    Artur my email is ahmedtarek667 @ gmail .com could you please contact me :) remove spaces between at

  49. Rahat Ahmed
    December 9th, 2018

    Please share the latest dumps . email: {email not allowed}

  50. Rahat Ahmed
    December 9th, 2018

    Please share the latest dumps. Email: **{email not allowed}** (remove * )

Comment pages
1 46 47 48 49 2815
Add a Comment