Home > Share your CCNA v3.0 Experience

Share your CCNA v3.0 Experience

August 23rd, 2016 Go to comments

The CCNA 200-125 has come to replace the old CCNA 200-120 exam. We create the “Share your CCNA v3.0 Experience” for everyone to share their experience after taking this exam.

Note: We have a topic of Frequently Asked Questions & Tips for CCNA learners, surely you will find valuable information about the CCNA exam there.

Please share with us your experience after taking the new CCNA 200-125 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…

Your posts are warmly welcome! Hope you will find useful information from friends who have taken the CCNA exam!

Note: Email is not allowed to show in comment section.

Comments (50) Comments
Comment pages
1 74 75 76 77 78 79 2815
  1. Fred
    March 15th, 2019

    @RYA

    1->1 and 2->2

  2. Gorwinn
    March 15th, 2019

    @Ebrahem

    Can you please send the newest dumps to this email address, thank you =)

    tuscanypuig(at)gmail(dot)com

  3. Hitachi
    March 15th, 2019

    So, excessive collision is for you a, I would say, “secondary issue” of connecting two devices with different duplex mode to each other. I think you’re right but proper understanding requires the highest level of concentration :)

    Regarding VTP you’re right as well. That’s the reason why we should “reset” vtp revision on a new switch before we added it to the existing vtp domain.

    In that question I would also choose the same version and domain name. But the suggested answer “The VTP server must have the highest revision number in the domain” is also confusing. It doesn’t have to but when a clients appears with a higher revision number, the current vlan database will be changed or destroyed.

    “If a switch with the same VTP domain name but a higher configuration number is added to the domain, invalid VLANs can be propagated and / or valid VLANs can be deleted”

    can but doesn’t have to, right? So it is recommended that vtp server has the highest revision but it’s not a must?

  4. Anonymous
    March 15th, 2019

    @Ebrahem

    Can you please send the newest dumps to this email address, thank you

    georgechitema12345 at gmail dot com

  5. Fred
    March 15th, 2019

    not a “secondary issue” but its more of a cause and effect scenario. Duplex mismatch is the main cause and collisions are the result. I guess :)
    well as you said we should “reset” vtp revision on a new switch before we add it so that implies nothing is stopping any client with higher revision number to be added. and also we already have two definitive answers…same version and same domain.

    and btw I can be wrong anytime so any useful info is always welcomed.

  6. LoT1
    March 15th, 2019

    @Ebrahem
    Please send the dumb .
    Aouf.Louay(AT)g.m.ail*com

  7. Hitachi
    March 15th, 2019

    With “secondary” I meant the next level of the occurring issue :-) You connect wrong duplex—》get duplex mismatch—》you get potentially an excessive collision.

    Are you also planning on taking exam in the nearest future?

  8. Fred
    March 15th, 2019

    yea and you ?

  9. Hitachi
    March 15th, 2019

    Yes, me too. I’ m just waiting for a discount voucher.

  10. Fred
    March 15th, 2019

    ping me not for voucher tho but just :) fmukatoutlook

  11. Angela
    March 15th, 2019

    Passed too today using the following dump

    dl-file.com/2ukskoil61ls/200-125.pdf.html

  12. Hitachi
    March 15th, 2019

    Of course, I will do it.

  13. Angela is mother fu**r
    March 15th, 2019

    Angela is mother fu**r fake…..

  14. Anonymous
    March 15th, 2019

    Guys, just took the CCNA test 2 days ago and barely passed it! In my opinion the test was not easy because Cisco changed or have made available some new and logic challenge questions. Just a piece of advice, read a lot of questions, and focus more on the explanation part of the right choice. Try to learn the logic behind any explanation (sometimes there is no explanation or you just have to memorize that shit!) and try to figure how things work. Some questions were NEW and never noticed them before (at least as far i remember though) . Labs were VLAN configuration and RIPv2 ,EIGRP, OSPF Neighbour troubleshooting. Learn the topology, how it works, practice them (they are cute bthw) and focus more on the command, there is no need for other mystic or strange other commands unless told to use them! In my test were a lot of questions regarding switch ports, VTP, Ipv6 and routing as well. Prepare good on the Switch# part and routing protocols. No DrgD questions just logic questions mainly. Only one subneting question to find the right subnetmask. And finally the most waited part regarding dumps is that i dont know a shit about chinese. korean, japanese or somali dumps, i just know that the dump i took an eye on was that of the Testkings last updated 14 dec and is an (.ete ) file. There s about 605 questions in total where 585 are under the v2 version and the last 20 questions are under V3 version all of this under thwse same (.ete) file. Learn those 605 questions hard, bthw there is a ton of explanation under most of the right choices, so you caawdn train and enrich you sleepy mind on how things work, are and will behave. I thought it would be reasonable to share my experience here with you because trust me, i know how you feel right now. .Good luck to everyone

  15. VALID QUESTIONS
    March 15th, 2019

    9xx/1000 points! Passing score is 910.

    – 6 SIMs: RIPv2, DHCP, GRE Tunnel, EIGRP, ACL, EIGRP GRE

    – OSPFv3 and VLAN Troubleshooting

    – One new Drag and Drop about collsion/carrier.

    Without Stars***
    https:/*/dri*ve.go*ogle.com*/open?id=1ohCrPvfAK39gnNy77C-tA7QVQuSlVAjw

  16. franledo
    March 15th, 2019

    9.Which two statements about the tunnel mode ipv6ip command are true? (Choose two.)
    A. It enables the transmission of IPv6 packets within the configured tunnel. RIGHT
    B. It specifies IPv4 as the encapsulation protocol. RIGHT
    C. It specifies IPv6 as the encapsulation protocol.
    D. It specifies IPv6 as the transport protocol.
    B or d
    10Which MTU size can cause a baby giant error?
    A. 1500 ETHERNET MTU
    B. 9216
    C. 1600 RIGHT!!
    D. 1518 ETHERNET MTU PLUS CRC
    C or d.
    11What is the status of port-channel if LACP is misconfigured?
    A. Forwarding
    B. Enabled
    C. Disabled RIGHT!! STATUS OF PORT CHANNEL NOT THE PHYSIQUE PORT :)
    D. errdisabled
    C or d
    12Which statement about spanning-tree root-bridge election is true?
    A. It is always performed automatically
    B. Each VLAN must have its own root bridge RIGHT!!!
    C. Each VLAN must use the same root bridge
    D. Each root bridge must reside on the same root switch
    A or b
    13.
    What are two requirements for an HSRP group? (Choose two.)
    A. exactly one active router RIGHT!!!!!
    B. one or more standby routers RIGHT!!!!
    C. one or more backup virtual routers
    D. exactly one standby active router YOU CAN HAVE MORE THAN ONE! :)
    E. exactly one backup virtual router
    B or d
    ,14When is the most appropriate time to escalate an issue that you are troubleshooting?
    A. when you lack proper resources to resolve the issue RIGHT!!!!!!!!!!!
    B. when you have gathered all available infoscarmation about the issue
    C. when you have been unable to resolve the issue after 30 minutes
    D. when a more urgent issue that requires your intervention is detected
    A or c

  17. Mike
    March 15th, 2019

    I can confirm that the dump posted by Angela is valid

    dl-file.com/2ukskoil61ls/200-125.pdf.html

  18. RYA
    March 15th, 2019

    D & D Question:

    Control plane and Data Plane : confusion between “filtering” and “Device Access” can some please tell that which belongs to where?

  19. Ram
    March 15th, 2019

    Hi @Ebrahem,

    Can i get a copy of the most recent dumps please?

    ramb0000menow (at) gmail (dot) com

  20. Zoe
    March 15th, 2019
  21. Fred
    March 16th, 2019

    There were three low life morons on this comments page please can someone tell the correct names ? :)

  22. Fred
    March 16th, 2019

    @RYA
    filtering -> data plane
    device access -> control plane

  23. Fred
    March 16th, 2019

    @franledo
    9. ipv6 is just a passenger and rest of everything is ipv4 i.e. encapsulation/transport
    10. MTU 1518 – MTU is just a payload of the frame+18 frame header/trailer – baby giant error is for frames over 1518 upto 1600
    11. C
    12. B i believe
    13. AB
    14. A or B – not sure as cisco 7 troubleshooting steps says gather info

  24. luiyi
    March 16th, 2019

    passed today from the following link:

    https://examclubs.com

  25. Zoe and luiyi both are fake
    March 16th, 2019

    Zoe and luiyi both are fake….

    Zoe and luiyi both are fake…

  26. 39Miku
    March 16th, 2019

    Which DTP switch port mode allows the port to create a trunk link if the neighboring port is in trunk mode, or desirable auto mode?
    A. Dynamic auto
    B. Trunk
    C. Dynamic desirable
    D. Access
    A or C

    Which three technical services support cloud computing?
    A. network-monitored power sources
    B. layer 3 network routing
    C. ip localization
    D. redundant connections
    E. VPN connectivity
    F. extended SAN services
    B,C,F or D,E,F

  27. Myz
    March 16th, 2019

    @39Miku

    Correct -> Dynamic desirable

    I want to explain different dynamic desirable with dynamic auto. When you set port as dynamic desirable, port will send packet for dtp negotiation and if find any port trunk, desirable auto or dynamic desirable it can be negotation with this port and they become trunk port.

    But when you sen dynamic auto, this protocol just listen port if come any negotation packet from dynamic desirable it will accept and become trunk with dynamic desirable.

    There is the different dynamic desirable send negotation packet for trunk, desirable auto or dynamic auto but desirable auto DO NOT send any packet for negotiaton it just listen port and if negatiaton packet come it accept this packet and become trunk.

    If you set 2 port mutual desirable auto port they do not negatiation and they will become access port because they do not send packet with each other.

    But if you set 2 port mutual dynamic desirable port they will negotation and will be trunk because they send negotion packet each other.

    And if you set one port dynamic desirable and other one is desirable auto (or trunk it doesn’t matter) again they will negotation and will be trunk.

    Other one question is D,E,F

  28. Alert of today
    March 16th, 2019

    Seven## fail
    New questions added. Any person have new update. I was also do 9tut question. But fail exam. Email:: lavaa0911 (@gmail) . c o m

  29. Ebrahem
    March 16th, 2019

    @ ramb0000menow
    @ Aouf Louay
    @ georgechitema12345
    @ tuscanypuig
    @ vocaliod13
    @ renee help
    @ from-snikaju031
    @ py2069
    @ yasin nor99
    @ briancraig510
    @ georgechitema12345
    @ kayomot
    @ briancraig510

    Check your emails :)
    good luck

    @all guys
    please note that >>>> I DONT POST LINKS HERE <<<< if anyone post links using my name then that is FAKE link, he is not me.

    (((((( by the way , please note that there are many wrong answers in 62q and chinese dump , the most trust answers are in 9tut dump ))))

    **update 2019-3-15** some friend told me that he passed the exam today and almost all questions from 62q with one or two questions from the chinese

  30. Alert of today
    March 16th, 2019

    Ebrahem can u send me also 62q bcz i fail exam today email:: lavaa0911 (@gmail) . c o m

  31. gregor
    March 16th, 2019

    hello
    Has anyone passed today ?

  32. jakie
    March 16th, 2019

    @ebrahem Can you say that, will the 62q remain same next week ? or there is chance of getting changed? If it remains the same, is it for the whole week or it may can change in mid week as well?

  33. Anonymous
    March 16th, 2019

    Hi @Ebrahem,

    Can i get a copy of the most recent dumps please?
    Thanks a lot :)

    sadasdastin (at) gmail (dot) com

  34. Fred
    March 16th, 2019

    @Ebrahem
    Thanks for the info

    @jakie and all others
    Atleast please do complete chinese dumps as well as Q62 as there is no point risking your money and just passing wont help you in your careers unless you have atleast some technical knowledge. I don’t know why everyone just want to do 62Q. what would you do with such a certificate…

  35. npguy
    March 16th, 2019

    Hi @Ebrahem,

    Can i get a copy of the most recent dumps please?
    Thanks a lot :)

    sadasdastin (at) gmail (dot) com

  36. Ebrahem
    March 16th, 2019

    You can rely on this, two of my friends passed using it

    http://dl-file.com/otqxaqpebkn5/200-125.pdf.html

  37. jakie
    March 16th, 2019

    @Fred

    Ohh no brother. Actually I studied and prepared the whole CCNA content with 38 hrs of video lecture. And I practiced those labs as well which were in previous version. First, i made all concepts clear and now I came across this website. I wrote down each and every thing and made a notes which can help me anytime. Next week is very tight for me as i have 3 midterms.

    I Know this will not help me if I will just prepare 62q. I am gonna do everything.

  38. Fred
    March 16th, 2019

    @jakie

    Glad to hear that. so do everything and once done go through 62Q as well. Good Luck

  39. LANNY
    March 16th, 2019

    Hi @Ebrahem,

    Could you send me again the last dumb because I did not receive it.

    py2069(at)gma1l(dot)com

    Thanks a lot! :)

  40. andy madadian
    March 16th, 2019

    Hi everybody
    if 9tut dump is better than chinese, Has anyone got the latest version of 9tut dump ?
    please send it to me
    masoud.naderiAThotmailDOTcom
    thanks a lot

  41. VALID QUESTIONS.
    March 16th, 2019

    9xx/1000 points! Passing score is 910.

    GRE-Multilink Sim
    DHCP Sims
    EIGRP Troubleshooting Sim
    OSPF Neighbor Sim
    Access-list Sim
    VLAN Troubleshooting Sim

    Without Stars***
    https:/*/dri*ve.go*ogle.com*/open?id=1ohCrPvfAK39gnNy77C-tA7QVQuSlVAjw

  42. Jenyy
    March 16th, 2019

    9.Which two statements about the tunnel mode ipv6ip command are true? (Choose two.)
    A. It enables the transmission of IPv6 packets within the configured tunnel. RIGHT
    B. It specifies IPv4 as the encapsulation protocol. RIGHT
    C. It specifies IPv6 as the encapsulation protocol.
    D. It specifies IPv6 as the transport protocol.
    B or d
    10Which MTU size can cause a baby giant error?
    A. 1500 ETHERNET MTU
    B. 9216
    C. 1600 RIGHT!!
    D. 1518 ETHERNET MTU PLUS CRC
    C or d.
    11What is the status of port-channel if LACP is misconfigured?
    A. Forwarding
    B. Enabled
    C. Disabled RIGHT!! STATUS OF PORT CHANNEL NOT THE PHYSIQUE PORT :)
    D. errdisabled
    C or d

  43. asgar
    March 16th, 2019

    in which situation would the use of a static route be appropriate?

    a- to configure a route to the first layer 3 device on the network segment

    b- to configure a route from an isp router into a corprate network.

    c- to cofigure a route when the administrative distance of the current routing protocol is too low.

    d- to reach a network is more than 15 hops away.

    e- to provide access to the internet for enterprise hosts.

  44. gregor
    March 16th, 2019

    hello
    Has anyone passed today ? please talk :)

  45. Hitachi
    March 16th, 2019

    Hi,

    in my opinion b. Static route to a stub network. We can assume that the ISP Router has only one interface connected to the corporate network so the static route is optimal to use.

    E would also possible but i think they would ask about default route if the E was a right answer.

  46. andy madadian
    March 16th, 2019

    Which MTU size can cause a baby giant error?
    A. 1500
    B. 9216
    C. 1600
    D. 1518

  47. gregor
    March 16th, 2019

    @andy madadian

    ass i know
    D.1518

  48. andy madadian
    March 16th, 2019

    @gregor
    But in cisco.com it seems answer is 1600

  49. gregor
    March 16th, 2019

    @andy madadian

    yes i searched this now

    A. 1500 – This is a normal size and will not generate a Baby Giant.

    B. 9216 – This is a Jumbo frame so again will not generate a Baby Giant.

    C. 1600 – This size per Cisco documentation will generate a Baby Giant.

    Now the one that seems to be causing this indecision.

    D. 1518 – Based on Cisco documentation anything up to 1522 will not need to have the MTU changed and therefore will not generate a Baby Giant.

    So based on Cisco documentation the only correct answer is C.

  50. Hitachi
    March 16th, 2019

    1518 is still a normal frame. 1519 (without vlan tag) – 1600 is a baby giant and over 1600 jumbo.

Comment pages
1 74 75 76 77 78 79 2815
Add a Comment