Home > VLAN Troubleshooting Sim

VLAN Troubleshooting Sim

April 29th, 2019 Go to comments

Refer to the exhibit.

VLAN_Troubleshooting_Topology.jpg

Your colleague has built a Layer 2 network in your client locations. You must verify the configuration and fix any issues identified as per customer requirements.
Customer requirements:
+ Verify if switch ports are assigned correct VLANs as shown in topology. Identify and fix any misconfiguration found in three switches
+ Verify if trunk links are operational between switches and the IEEE 802.1Q trunk encapsulation method is used. Identify and fix any misconfiguration found in trunk configuration
+ Make sure ports connected between switches are set as trunk ports

We are not sure about the details but here are the faults in this sim:

– Native VLAN mismatch between SW1 & SW3
– Switchport mode mismatch: one in access mode while the other end in trunk mode -> need to change from access to trunk mode
– One port in VLAN 500 while other port in VLAN 600

Recommended commands to solve this sim: show int trunk, show vlan, show run.

You can download and practice this sim with Packet Tracer at: http://congressreiki.ranm.org/?all=download/9tut.com_CCNA_VLAN_Troubleshooting_Sim.zip

Commands to fix the issues:

SW1, SW2:
interface e0/2
 switchport mode access
 switchport access vlan 500
interface e0/3
 switchport mode access
 switchport access vlan 600

SW3:
interface e0/0 (or interface e0/1 of SW1)
 switchport trunk encapsulation dot1q
 switchport mode trunk
 switchport trunk native vlan … (must match the native VLAN on the other end, use “show int trunk” command on SW1 to check SW1 native VLAN)

Comments (37) Comments
Comment pages
1 6 7 8 3911
  1. Tofiq
    August 17th, 2019

    Please send me latest dumps tofiq nezerov 1998 @ gmail com

  2. CCNA Dumps
    August 24th, 2019

    hello
    For ccna latest dumps email q rawalpindi @ gmail.com

  3. Anonymous
    August 27th, 2019

    i did my own solution for this task

    ill make the switch 2 enable the ip routing to make it layer 3…

    then i put ip address to vlan 500 and vlan 600
    to make it good ill enable dchp in server 1
    now its working fine all of them are getting ip from server 1 and ping vlan to vlan

  4. Texas
    August 29th, 2019

    Passed this exam today. I had purchased vce dumps for $40 which weren’t much useful. I didn’t study 9tut questions and 70% questions came from 9tut. I got 62 questions our of which I got this lab, GRE tunnel and vlan simulation. Rest 59 questions were mcq

  5. Anonymous
    September 7th, 2019

    Is this the correct solution bcz i can’t ping from PC2 to PC1..?

  6. Roman
    September 8th, 2019

    anyone could pls send me latest dumps to “roma2598 @ gmail.com”

  7. Javdangermouse
    September 16th, 2019

    Those commands to fix the issues are not what your program accepts.
    SW3
    Only has two answers and you have four possible.
    Interface e0/0
    switchport trunk native vlan 1

    These work

  8. Gabor
    September 23rd, 2019

    Anyone could please send me latest dumps to “{email not allowed}”. Thanks!!!

  9. Gabor
    September 23rd, 2019

    Anyone could please send me latest dumps to “molnargabesz @ gmail.com”. Thanks!!!

  10. 4m
    September 23rd, 2019

    could any one pliz send me the latest dumps i am taking the eaxma in three days on “hancet550 @ gmail . com”

  11. yuri
    September 26th, 2019

    Hello everybody;

    Please send me latest dumps {email not allowed}

  12. nins
    September 26th, 2019

    Hi all, may I know how do we check the sims faulty? by checking the config from the sims PC?

  13. Dan
    October 5th, 2019

    Anyone could please send me latest dumps to “mr.ukkoz @ gmail.com”. Thanks!

  14. joseph
    October 15th, 2019

    can anyone please send me latest dumps on {email not allowed}

  15. joseph
    October 15th, 2019

    can anyone please send me latest dumps on mirallojp @ gmail.com

  16. Ray Mickhael
    October 25th, 2019

    please send me the latest dumps raymickhael @ gmail.com

  17. Ali
    October 26th, 2019

    Does anyone have the VCE Simulator? plz send the link to free downlload

  18. mohamed
    November 1st, 2019

    I sell the vce and you can send to me pdf i’ll converted for you as a vce file. other thing is you don’t have pay vce or pay evey year.

  19. Anonymous
    November 1st, 2019

    I sell the vce and you can send to me pdf i’ll converted for you as a vce file. other thing is you don’t have pay vce or pay evey year. I sell you too CCNA with vcs file.

  20. herve
    November 5th, 2019

    please send latest dump to ndjapa1102 @ gmail dot com

  21. help please
    November 7th, 2019

    Hello everybody please can you send me the latest dump for free at my email (nouralhodaallah @ gmail dot com)i have the exam next week and i don’t know what ‘s news in ccna R&S 200-125, that will very helpfull for me thank you in advance

  22. Anonymous
    November 8th, 2019

    Hello everyone,

    Please share the CCNA 200-125 dump at — marieo_eo at hotmail.com — I will take the exam next month. thank you!!!

  23. erik
    November 11th, 2019

    could anyone please send me latest dumps CCNA 200-125 on emussin @ gmail.com

  24. NetworkE
    November 22nd, 2019

    My seven Students Passed the CCNA 200 125 Exam, If any one want Latest Dumps and Lab with any kind of troubleshooting service is available contact us.
    networkexpert125 @ gmail dot com

  25. Kratos
    November 29th, 2019

    Can anyone help me regarding fast ethernet 0/0 of sw3, i dont really get what the next command

  26. Rajko
    December 10th, 2019

    Hello everyone,

    Please share the CCNA 200-125 dump at — rajkot at sbb.rs
    — I will take the exam next month. thank you!!!

  27. Anonymous
    December 10th, 2019

    Hello everyone,

    Please share simulation software for the CCNA 200-125 exam at — rajkot at sbb.rs
    — I will take the exam next month january 2020 . thank you!!!

  28. Blanchard blinyoloekangu at gmail.com
    December 11th, 2019

    Hi All

    Kindly can anyone please share with me the lasted CCNA 200-125 exam my email address is:

    I will take the exam next month January 2020. Thank you all in advance and God bless you all for the assistance and support.

    Your prompt response in connection herewith will be highly appreciated

  29. mohamed essam
    December 16th, 2019

    plz send me the last dumps
    esawy 1020 @gmail .com

  30. farhan ali
    December 26th, 2019

    please send me latest dumps at zurreedigital @ gmail .com

  31. Anonymous
    January 2nd, 2020

    Hellooooooo please send me the lastt drump , i take the exam next month daniel134 @ hotmail.es

    Byeee :D

  32. BekshoX
    January 4th, 2020

    Hi I am gonna take my CCNA 200-125 exam. Can anyone please send me the dump question or the last exam question. would be helpful for me.
    oa554537 @ gmail . com
    Thanks in advance

  33. Venti
    January 7th, 2020

    Hi, could anyone send me the last dump? I’m gonna take the exam next month.
    santys696 @gmail .com

    Thank you!!!

  34. Anonymous
    January 10th, 2020

    Latest PT Lab and Dumps.
    Don’t pay

    Free download from here.

    mycertexam.com/blog/2020/01/08/cisco-latest-questions-answers/

    Sharing is Caring.

  35. QP
    January 13th, 2020

    Only one command “show int switchport” on each switch will help you to resolve this sim.

  36. AceMeng
    January 16th, 2020

    How are you supposed to know what’s wrong or what to fix? Any help would be greatly appreciated!

  37. chungus
    January 16th, 2020

    ay dis bih on da test still

Comment pages
1 6 7 8 3911
Add a Comment